Tips & tricks: CamAPS FX

Dear Dani Grace and Jude,

Note: This page is advice for Grace, Jude and John. For any other reader, it’s information only. No therapeutic relationship is formed – read this.

If you select the CamAPS FX, here are the essentials:

  • How the algorithm works
  • Starting settings
  • Tips & tricks
  • Preventing and treating hypos
  • High-fat meals
  • Exercise

How the algorithm works

The CamAPS FX has four components:

  • Dana pump of YpsoPump (with pre-filled pump cart)
  • Dexcom G6 sensor or FreeStyle Libre 3 (with YpsoPump)
  • An Android SMART phone. Not iPhone enabled yet (March 2024)
  • The algorithm inside the CamAPS Fx APP that you connect to the sensor and pump

This graphic explains how the CamAPS FX algorithm works in a nutshell.

Take homes:

  • The algorithm works by auto-calculating basal rates and correction factors and delivers as an extended bolus every 8-12 minutes
  • Insulin increases when the glucose is rising
  • Insulin decreases and suspends if the glucose is predicted to go low
  • The target level is set at 5.8mmol/L (105mg/dL) which can be adjusted as low as 4.4mmol/L (80mg/dL) or as high as 11.0 (198 mg/dL) in as many time blocks as you want. This provides, ultimate flexibility.

Starting settings

The algorithms need a weight, average total daily insulin dose, and carb ratios. The algorithm does the rest. This includes active insulin time and carbs onboard time. The algorithm is continually updating and learning.

You will have to remember to keep your pump basal rates, correction factors and carb ratios up to date in case it goes out of the algorithm.

Once the above is set, you will only need to adjust your carb ratios and target level depending on the time in range!

Starting an AID system can be broken down into two parts. First, SURVIVE, then, THRIVE. You can download a guide on how to do this.

How to Survive and Thrive Guide – (CamAPS Fx).

Tips & tricks

If you want to get 70% or more time in range do not forget the basics:

Other things to be aware of:

  • Enter hypo treatments into the “Add meal” feature under “hypoglycaemia treatment”
  • Always suspend the pump when disconnecting (showers, sports, sex)
  • Keep the Android phone within 6 meters of you at all times, a waistband is a good idea
  • Update pump settings for if it goes out of the algorithm:
    • Basal rates
    • Correction factors
    • Carb ratios
    • Target level

Preventing and treating hypos

It would be awesome if hypos were a thing of the past. But this will not be the case.

The algorithm will be able to stop hypos overnight!

However, if you give too much bolus insulin for a meal or exercise without planning, hypos will still happen.

You will likely need less hypo treatment than normal because the algorithm will have already slowed or stopped the insulin at least 30 minutes prior.

You may also want to prevent hypos if you see the glucose is 4.0-6.0mmol/L (70-110mg/dL) and trending down.

This is a guide I use based on weight where 30kg is used as an example. The Survive and Thrive Guide – (CamAPS Fx) allows you to enter your weight to get a personalised chart.

You can download the hypo chart here if you want to try it?

High-fat meals

We know from the Mealtime Insulin Guide that high-fat meals with carbs, such as pizza and takeaways require additional insulin.

The algorithm auto-calculates active insulin and carbs on board so it’s good at responding to the delayed glucose rise from high-fat meals.

However, the best results have been seen by giving 50% of the carbs upfront and adding the other 50% into the “Add meal” feature under “Slowly absorbed meal”. This lets the algorithm know that if the glucose starts to rise it should be aggressive in management.

For example, for a 100g carbohydrate Pizza, give 50g as a bolus and add 50g into the “Slowly absorbed meal” feature.

There is another option if this does not work. Give 100% of carbs upfront, then bolus for 25-50% “fake carbs” 90 minutes after eating. In this example, bolus for 100g before eating and add in 25-50g extra 90 minutes after eating.

Exercise

There is the quick and dirty way and the more comprehensive planned method.

The quick and dirty method 

This involves putting on the “Ease Off” before starting, ideally 90 minutes before. Then supplement with small amounts of carbohydrates every 20 minutes as required.

Do not shovel loads of carbs in at once as the glucose might shoot high and the algorithm will increase the insulin and hypo risk.

How many carbs every 20 minutes?

Good question.

It depends on how much you weigh. Here is an example for a 50kg person. The Survive and Thrive Guide – (CamAPS Fx) allows you to enter your weight to get a personalised chart.

You can download the mmol/L and mg/dL versions if you want to give them a try?

Comprehensive planned method 

To be able to use this method you will need to work your way through the Exercise Guide, so you understand exercise types, bolus reductions, and how to change a plan after trial.

Ready it?

Great, you are up to speed with exercise management.

This table should now make complete sense!

Go forth and conquer.

Exit mobile version